Release time: 2022-03-24

It is a very common problem that the gear noise becomes louder. It may be that the gear transmission is damaged, you can check the gear transmission; or the installation of the rack and pinion is wrong, you need to refer to the installation steps to check whether the rack is not The installation is correct; in the end,……

Release time: 2022-03-24

Introduction to NEUGART NEUGART was established in 1928. At the beginning, it was only making precision gears for precision machinery such as clocks. In 1975, it began to produce planetary gearboxs. Later, it found a good development prospect in Ch

Release time: 2022-03-23

Planetary gearboxs play a very important role in all walks of life, such as in the CNC machine tool industry. There is still a lot of knowledge about the gearbox. Today, let’s analyze how to maintain the high-precision planetary gearbox. Before use, the gearbox needs to be checked on a basic level, and the later stage ……

Release time: 2022-03-23

The noise of the planetary gear gearbox is mainly due to the friction, vibration and collision of the driving gear in the reduction gear box and the concentricity of the motor shaft. How to effectively reduce and reduce the noise to make it more environmentally friendly. In gear drive products, how to reduce the gear d……

Release time: 2022-03-22

Planetary gearbox is a kind of commonly used reduction equipment, which has the characteristics of small size, large transmission ratio and low noise, and is widely used in various mechanical transmission equipment. What are the factors that affect the be

Release time: 2022-03-22

Planetary gearbox is widely used in daily equipment manufacturing. The purpose of using it is to reduce the output speed and increase the output torque. It can be divided into single-stage and multi-stage according to the number of gear carrier stages. Fo

Release time: 2022-03-21

PLFE flange output gearbox is used in industries that do not require very high accuracy, but requires high rigidity, such as vertical direction. Under normal circumstances, considering the insufficient rigidity of the shaft, flange-type gearbox is general

Release time: 2022-03-21

The difference between the PLHE planetary gearbox and the economical type is that it is economical and the precision is greatly improved. The plhe adopts stainless steel for the outer casing, and the output shaft is the same as the N series pln, using all

Release time: 2022-03-19

NEUGART series PLPE planetary gearbox has the characteristics of economical gearbox, and also has its own improvement on this basis. Because it is equipped with large-sized deep groove ball bearings, it has high axial force and radial force, and does not

Release time: 2022-03-18

Planetary gearboxs often encounter some problems in their work, such as the problem that the gearbox breaks soon after running. Today, I will take you to understand what causes the output shaft of the gearbox to break. I hope it can help you. . 1.

Release time: 2022-03-17

It is very right that the industries that use planetary gearboxs often encounter some problems in their work, such as the output shaft does not rotate, the gearbox shaft is broken, etc. So how did these problems arise? These have a lot to do with the appl

Release time: 2022-03-16

There are many application industries for racks. STRRONSE racks are widely used in laser cutting machines, gantry trusses, etc. These require high precision for racks. Racks have two main processes: quenching and tempering and quenching. What are the char